Lifting Magnet B Manufacturer, Supplier, Factory, Exporter, Wholesale in china

Deutsch

Espanol

Tel: 0086-574-27903196
Fax: 0086-574-27903199
Add: no.65 dahetou road,ningbo,china
Email:
info@mademagnet.com
MSN:
jasonchenqj71@hotmail.com

Certificate

Lifting Magnet B

Lifting magnet ¨C Model B

Applications

Use the LM-B SERIES to move plate steel, block or round steel, and iron material in your shop. Super-powerful lifting magnet requires no electricity. It's perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc. Rated for up to 2000kgs!
Powerful magnet tested to hold OVER THREE TIMES the rated load for maximum safety
Rated for loads up to 2000kgs.
Eliminates dangerous straps and slings
Fast, safe, efficient loading and unloading
Use our handy application survey to help us determine the correct model for your lifting needs.

Note: On all our lifting magnets there is a built-in safety factor of 3.3 times the rated load. This means that the safety factor is 3.3 times the maximum rated load for each magnet. WARNING: Never lift more than the maximum rated load.
Operation
Simply move the lever to the "ON" position to engage the magnet. Spring-loaded lock keeps the magnet engaged until you release it.

ATTENTION: Never move the lever to the "ON" position unless the magnet is placed on an iron or steel object.

Lever in the "ON" position. Note the pin safety lock is engaged.

Lever in the "OFF" position.

Maximum Rated Load Plate Steel
Model	Material	Maximum Rated Load	Minimum Thickness
LM-150B	plate steel	150kg	20mm
LM-300B	plate steel	300kg	25mm
LM-600B	plate steel	600kg	30mm
LM-1200B	plate steel	1200kg	45mm
LM-2400B	plate steel	2400kg	55mm

Maximum Rated Load Plate Steel
Model	Material	Maximum Rated Load	Diameter Range	Minimum Length
LM-150B	round steel	80kg	50-200	20mm
LM-300B	round steel	150kg	25-300	25mm
LM-600B	round steel	300kg	100-500	30mm
LM-1200B	round steel	600kg	150-700	45mm
LM-2400B	round steel	1200kg	150-800	55mm

Dimensions(mm)
Model	A	B	C	D	E	F	G	H	Wt.
LM-150B	105	85	120	125	60	70	40	30	3kg
LM-300B	180	155	155	185	90	95	50	40	9kg
LM-600B	250	225	210	260	115	120	75	50	23kg
LM-1200B	280	240	287	370	165	170	95	87	50kg
LM-2400B	420	380	350	500	215	215	105	125	120kg

Lifting power depends upon carbon content of stock, stock thickness, and surface finish.

Lifting Power BY MATERIALS

	0%	50%	100%
M1	Low Carbon		100%
M2	Moderate Carbon		85%
M3	High Carbon		75%
M4	Cast Iron		70%

Effect of Surface Finish

	0%	50%	100%	150%
F1	Ground Surface			125%
F2	Rough Machined			100%
F3	Foundry Finish			90%
F4	Rough Cast			65%

Percent of Lifting Power (by thickness of material)
Thickness	Depth	LM-150B	LM-300B	LM-600B	LM-1200B	LM-2400B
T1	2.36 in	100%	100%	100%	100%	100%
T2	2.16 in	100%	100%	100%	100%	100%
T3	1.97 in	100%	100%	100%	100%	95%
T4	1.77 in	100%	100%	100%	100%	90%
T5	1.57 in	100%	100%	100%	100%	85%
T6	1.38 in	100%	100%	100%	90%	75%
T7	1.18 in	100%	100%	100%	80%	65%
T8	0.98 in	100%	100%	90%	70%	55%
T9	0.79 in	100%	90%	75%	60%	45%
T10	0.59 in	100%	70%	60%	50%	35%
T11	0.39 in	70%	50%	45%	35%	25%
T12	0.20 in	40%	30%	25%	20%	15%

Calculation Example: LM-600B, rated lifting power is 600 kg. The formula for calculating range of lifting capacity is: T x F x M x G x Capacity.
T = Thickness
F = Surface Finish
M = Material
G = Air Gap
ELM-600 Example: T8, F1, M2 and G
90% x 125% x 85% x 100% x 600 = 573.75kg